<cite id="h5xsm"></cite>

  • <ins id="h5xsm"><dl id="h5xsm"><em id="h5xsm"></em></dl></ins>
    <dd id="h5xsm"></dd>
    1. Hello, welcome to the official website of Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
      Hot keywords:

      Rexroth hydraulic pump hydraulic pump station plunger pump hydraulic station system variable plunger pump

       

      About us
      News

      A4FO quantitative axial piston pump

      Your position: Home page > Product center > Rexroth hydraulic pump > A4FO quantitative axial piston pump

      A4FO quantitative axial piston pump

      A4FO quantitative axial piston pump

      Classification: Rexroth hydraulic pump

      Ddetailed information

      A4FO quantitative axial piston pump

       

      safety instructions
      When starting and during operation, the pump housing must be filled with hydraulic oil (fill into the housing cavity). Must start at low speed without load until the system is completely empty.
      When parked for a long time, oil can be drained from the case through the working pipeline. When restarting, ensure that enough oil is injected into the shell.
      The minimum suction pressure of port S must not drop below 0.8 bar.
      Installation location
      The axis is horizontal at the bottom. When installing on the oil tank, it is not allowed to adopt the installation position of "shaft level, suction port towards the bottom"!
      Installation below the tank level
      The pump position is below the lowest oil level in the tank (standard)
      ? Fill the axial piston pump before starting through the case drain port at the highest position
      ? Suggestion: Fill the suction line
      ? Run the pump at low speed (ignition speed) until the pump system is completely filled
      ? The minimum immersion depth of the suction line or the drain line in the fuel tank: 200 mm (relative to the lowest oil level in the fuel tank).
      The installation position is higher than the oil tank level
      Pumps installed at a position higher than the lowest oil level in the oil tank
      ? The installation position is lower than the oil tank level
      ? It is not allowed to adopt the installation positions of "shaft against the top" and "shaft level, suction port at the bottom" (when the pump is stopped, the pump casing drains oil through the suction line).
      ? Note:-Maximum allowable straw length hmax = 800 mm
                     -The minimum allowable pressure of port S (minimum suction pressure)

      A4FO定量軸向柱塞泵
      A4FO定量軸向柱塞泵
      A4FO定量軸向柱塞泵

      Product navigation

      Home page  REXROTH  About Us  News Center  Download Center  Product Center  Site Map  XML Map

      Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD

      Tel: 027-85849187? Fax: 027-85849186? Pgone: 13971340391

      Email: wh@rexroth-hyd.com? QQ:2909698088

      Address: No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

      Factory address: Shenghua Industrial Park, Xincheng 12th Road, Dongxihu District, Wuhan

      鄂ICP備16006620號6?

      鄂公網安備 42010302001238號

      You are the 1341164th visitor

      国产成年女一区二区三区_午夜亚洲国产精品福利_精品极品三级久久久久_99久久亚洲综合精品网站