<cite id="h5xsm"></cite>

  • <ins id="h5xsm"><dl id="h5xsm"><em id="h5xsm"></em></dl></ins>
    <dd id="h5xsm"></dd>
    1. Hello, welcome to the official website of Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
      Hot keywords:

      Rexroth hydraulic pump hydraulic pump station plunger pump hydraulic station system variable plunger pump

       

      About us
      News

      A8VO axial variable double pump

      Your position: Home page > Product center > Rexroth hydraulic pump > A8VO axial variable double pump

      A8VO axial variable double pump

      A8VO axial variable double pump

      Classification: Rexroth hydraulic pump

      Technical Data Sheet
      Series 61/63
      Size 55...200
      Nominal pressure 350 bar
      Peak pressure 400 bar
      For open loop open loop

      Ddetailed information
      A8VO axial variable double pump

      A8VO軸向變量雙泵
      series
      A8VO axial piston variable double pump
      specification
      55 80 107 140 200
      Work pressure
      Nominal pressure 350 bar
      Peak pressure 400 bar
       
      controlling device
      Independent power controller without power override
      With hydraulic stroke limiter (positive control) and external pilot oil pressure supply
      With load sensing
      With hydraulic power coupler
      And load sensing
      And hydraulic stroke limiter (negative control)
      Hydraulic stroke limiter (positive control) and external pilot oil pressure supply
      Hydraulic stroke limiter (negative control) and external pilot oil pressure supply
      Independent power controller with overriding power control by pilot pressure
      With hydraulic stroke limiter (positive control) and external pilot oil pressure supply
      With load sensing
      With hydraulic power coupler
      And load sensing
      And hydraulic stroke limiter (negative control)
      Hydraulic stroke limiter (positive control) and external pilot oil pressure supply
      Hydraulic stroke limiter (negative control) and external pilot oil pressure supply
      Electric control with proportional solenoid (positive control) U = 24 V
       
      characteristic
      – Variable double pump is equipped with two axial conical plunger rotating components with inclined axis design for hydrostatic transmission in an open circuit
      – The flow rate is proportional to the input speed and displacement, and it changes steplessly from qv max to qv min(0)
      – The pump is suitable for mounting directly on the flywheel housing of a diesel engine
      – The auxiliary pump and the two oil circuits share one suction port
      – Powerful control program, which can realize different control and adjustment functions
      – Independent power controller
      – Built-in auxiliary pump with pressure relief valve, optional additional pressure relief valve
      – A variety of power output devices can be used to install axial piston and gear pumps
      – Outstanding power/weight ratio
      – Long service life
       
       

       

      characteristic
      – Variable double pump is equipped with two axial conical plunger rotating components with inclined axis design for hydrostatic transmission in an open circuit
      – The flow rate is proportional to the input speed and displacement, and it changes steplessly from qv max to qv min(0)
      – The pump is suitable for mounting directly on the flywheel housing of a diesel engine
      – The auxiliary pump and the two oil circuits share one suction port
      – Powerful control program, which can realize different control and adjustment functions
      – Independent power controller
      – Built-in auxiliary pump with pressure relief valve, optional additional pressure relief valve
      – A variety of power output devices can be used to install axial piston and gear pumps
      – Outstanding power/weight ratio
      – Long service life
      safety instructions
      – The A8VO pump is designed for use in open circuits.
      – Project planning, assembly and commissioning of the pump must be carried out by qualified personnel.
      – Working line ports and function ports are only designed to install hydraulic lines.
      – During and shortly after operation, the motor (especially the solenoid) may be at risk of burns. Take appropriate safety precautions, such as wearing protective clothing.
      – The characteristics of the pump may vary, depending on the working condition of the pump (working pressure, oil temperature).
      – Tightening torque:
      -The tightening torques specified in this technical data sheet are all maximum values ??and must not exceed these values ??(maximum thread torque).
        Observe the manufacturer's instructions for the maximum allowable tightening torque of the installation tool used!
      -For DIN 13 fixing screws, we recommend a separate check of the tightening torque according to the 2003 version VDI 2230.
      – Subject to the data and information provided here.
       
      Installation Notes
      safety instructions
      During commissioning and operation, the axial piston unit must always be filled with hydraulic oil and discharge air. In the case of relatively long periods of inactivity, the above precautions should also be observed, because
      The system may be drained through hydraulic lines.
      The case drain cavity is internally connected to the oil suction cavity. There is no need to connect the case drain line to the tank.
      Note the characteristics of the size 200 flushing fluid. (Port R4)
      Under all working conditions, the oil suction line must pass into the position below the lowest oil level in the oil tank.
      The minimum suction pressure of port S must not drop below 0.8 bar.
      Installation location
      The axis is horizontal.
      Installation below the fuel tank
      Installation below the fuel tank means that the pump should be installed below the lowest oil level of the fuel tank.
       



       

       

      Product navigation

      Home page  REXROTH  About Us  News Center  Download Center  Product Center  Site Map  XML Map

      Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD

      Tel: 027-85849187? Fax: 027-85849186? Pgone: 13971340391

      Email: wh@rexroth-hyd.com? QQ:2909698088

      Address: No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

      Factory address: Shenghua Industrial Park, Xincheng 12th Road, Dongxihu District, Wuhan

      鄂ICP備16006620號6?

      鄂公網安備 42010302001238號

      You are the 1341162th visitor

      国产成年女一区二区三区_午夜亚洲国产精品福利_精品极品三级久久久久_99久久亚洲综合精品网站